2007 - Egypontos úszó rögzítő 0,7 mm-es (4db/cs)

Fastening the float to the line with an easy-to-use adapter.

This handy little adaptor replaces the traditional silicon tube fastening. No need to bother with threading through silicon tube, their tearing, or the difficulties of float changing.
This handy little adaptor replaces the traditional silicon tube fastening. No need to bother with threading through silicon tube, their tearing, or the difficulties of float changing. With Cralusso's float adaptor you can fasten your drop floats with carbon, fiber or steel stem to the line in a quick and simple way.

Use it as follows.

Thread the line through the thin metal wire, then slip the rubber float fastener onto the line.
Following this, push the bottom stem of the float into the adaptor, and check if it's tightened properly.
You can simply and securely fasten the float and adjust the leader.

If you're using it on a fly rod with a sinking line, in wind your line can easily submerge, and your rig will drift slower.

The probability of line hang-up and entanglement is decreased.

You can catch the bites with greater efficiency, because the body of the float tips out upon striking, as it has no resistance against the water.

You can use it in a variety of ways, it also provides a precise and gentle way to fasten the split shots to the line.

Ideal fastening is provided by adaptors that are thinner than the float stem by 0.1-0.3mm, it will be available in three sizes:
- 0.5mm adaptor for floats with 0.6-0.8mm stem
- 0.7 mm adaptor for floats with 0.8-1.0 mm stem
- 0.9mm adaptor for floats with 1.0-1.2mm stem

The float adaptors can be bought separately in each size, or in the practical 2007 mix set, which contains all three sizes.